1. Product size: 120mm*80mm*182mm
2.Rated voltage: DC 29.6V
3.Charging limit voltage: DC 33.6V
4.Charging current: 3.5A
5.Rated capacity: 8000mAh, 236.8Wh
6.Standard: IS 16046(Part 2)/IEC 62133-2
7.Self-developed battery management system (BMS)
8.Functions: power display, battery storage self-discharge protection, balance charging protection, overcharge protection,
overcharge protection, over-discharge protection, short-circuit protection, battery load detection protection.
522,50 € Exc.VAT (642,68 € Inc. 23% VAT)
Available on backorder
The Unitree Go2 is a quadruped robot that is designed for education, research, and entertainment. It is powered by four 4D LiDAR L1 sensors, which provide it with a 360° x 90° field of view and a maximum scanning distance of 30 meters. The Go2 is also equipped with 12 knee joint motors, which allow it to move smoothly and …
1.Charging voltage: 33.6V
2.Charging current: 9A
3.Working environment temperature: 5℃-40℃
4.Storage Temperature: 22℃-28℃.
5.Relative humidity: ≤95%.
6. Must use together with Go2 EDU Plus (Mid-360 LiDAR) or Go2 EDU Plus (XT16 LiDAR)
1. Degree of freedom: 6
2. Load: 500g (ideal weight)
3. Maximum arm span
600mm (excluding the length of the clamping jaws, subject to minor variations for subsequent structural changes);
715mm (including the length of the jaws, subsequent structural changes may have a small change)”
4. Power Requirement: 24V 2.5A (MAX 5A)
Interface: DC5.5-2.1
Power: 60W
5. Control interface: control communication interface RJ45 (ETH)
NVIDIA Jetson NX
For Go1 Edu basic version, it will be equipped with 3 Nano, but 1 Nano can be changed into 1 Jeston Xavier NX. After the installation of NX, it will support vslam, gesture recognition, machine learning, etc.
Reviews
There are no reviews yet.