

1. Degree of freedom: 6 2. Load: 500g (ideal weight) 3. Maximum arm span 600mm
1. Degree of freedom: 6 2. Load: 500g (ideal weight) 3. Maximum arm span 600mm (excluding the length of the clamping jaws, subject to minor variations for subsequent structural changes); 715mm (including the length of the jaws, subsequent structural changes may have a small change)" 4. Power Requirement: 24V 2.5A (MAX 5A) Interface: DC5.5-2.1 Power: 60W 5. Control interface: control communication interface RJ45 (ETH)
1. Product size: 120mm*80mm*182mm 2.Rated voltage: DC 29.6V 3.Charging limit voltage: DC 33.6V 4.Charging current:
1. Product size: 120mm*80mm*182mm 2.Rated voltage: DC 29.6V 3.Charging limit voltage: DC 33.6V 4.Charging current: 3.5A 5.Rated capacity: 8000mAh, 236.8Wh 6.Standard: IS 16046(Part 2)/IEC 62133-2 7.Self-developed battery management system (BMS) 8.Functions: power display, battery storage self-discharge protection, balance charging protection, overcharge protection, overcharge protection, over-discharge protection, short-circuit protection, battery load detection protection.
Go2 Battery Fast Charging, Long Endurance Provide Strong Power to Your Robots 1. Product size:
Go2 Battery Fast Charging, Long Endurance Provide Strong Power to Your Robots 1. Product size: 120mm*80mm*182mm 2.Rated voltage: DC 28.8V 3.Charging limiting voltage: DC 33.6V 4.Charging current: 9A 5.Rated capacity: 15000mAh, 432Wh 6.Standard: IS 16046(Part 2)/IEC 62133-2 7.Self-developed battery management system (BMS) 8.Functions: power display, battery storage self-discharge protection, balance charging protection, overcharge protection, overcharge protection, over-discharge protection, short-circuit protection, battery load detection protection
1. Product size: 210mm*108mm*48.2mm 2. Input power supply: 100-240V~50/60Hz 4A 350VA 3. Output power supply:
1. Product size: 210mm*108mm*48.2mm 2. Input power supply: 100-240V~50/60Hz 4A 350VA 3. Output power supply: 34.0V, 3.5A, 119.0W 4. Standard battery charging time: 2h 5.Long life battery charging time: 4h
1. Product size: 210mm*108mm*48.2mm 2. Input power supply: 100-240V~50/60Hz 4A 350VA 3. Output power supply:
1. Product size: 210mm*108mm*48.2mm 2. Input power supply: 100-240V~50/60Hz 4A 350VA 3. Output power supply: 33.6V, 9.0A, 302.4W 4. Standard battery charging time: 0.8h 5.Charging time of long-life battery: 1.5h
1. Material: natural rubber + high strength material 2. 1 pair, 2 units
Scanning distance: 20m(@90% reflectivity); 10m(@10% reflectivity) Measurement accuracy: ±2.0cm Nearbyblind area: 0.05m Sampling frequency: 43200points/s
Scanning distance: 20m(@90% reflectivity); 10m(@10% reflectivity) Measurement accuracy: ±2.0cm Nearbyblind area: 0.05m Sampling frequency: 43200points/s Effective frequency: 21600points/s Circumferential scanning frequency: 11Hz Vertical scanning frequency: 180Hz Communication interface: TTL UART IMU: 3-axis acceleration +3-axis gyroscope Human eye safety level: Class 1(IEC60825-1:2014) Human eye safety
Scanning distance: 30m(@90% reflectivity); 15m(@10% reflectivity) Measurement accuracy: ±2.0cm Nearbyblind area: 0.05m Sampling frequency: 43200points/s
Scanning distance: 30m(@90% reflectivity); 15m(@10% reflectivity) Measurement accuracy: ±2.0cm Nearbyblind area: 0.05m Sampling frequency: 43200points/s Effective frequency: 21600points/s Circumferential scanning frequency: 11Hz Vertical scanning frequency: 180Hz Communication interface: TTL UART IMU: 3-axis acceleration +3-axis gyroscope Human eye safety level: Class 1(IEC60825-1:2014) Human eye safety
The Unitree B2 is an industrial-grade quadruped robot that is designed to be versatile and
The Unitree B2 is an industrial-grade quadruped robot that is designed to be versatile and easy to use. It is able to run at speeds of up to 6 meters per second and can climb stairs up to 40 centimeters high. It is also able to carry a payload of up to 40 kilograms. The B2 is equipped with a variety of sensors, including cameras, LiDAR, and sonar, which allow it to navigate its surroundings and avoid obstacles. It can also be programmed to follow a specific path or to perform complex tasks.
The Unitree H1 is a humanoid robot developed by Unitree Robotics. It is a full-sized,
The Unitree H1 is a humanoid robot developed by Unitree Robotics. It is a full-sized, general-purpose humanoid robot that stands at 1.8 meters tall and weighs 47 kilograms. The H1 is equipped with a 3D LiDAR sensor and a depth camera, allowing it to perceive its surroundings and navigate autonomously. It can walk at a speed of up to 5.5 kilometers per hour and can even run short distances.
Spot is a four-legged robot dog developed by Boston Dynamics. It is a mobile robot that can navigate rough terrain, climb stairs, and avoid obstacles. Spot is equipped with a variety of sensors, including cameras, lidar, and IMU, which allow it to perceive its surroundings and make decisions about its movements. It can also be customized with additional sensors and payloads to meet the specific needs of its users.
MyCobot 280 M5Stack 6 DOF Collaborative Robot (Dual Screen Version) is a lightweight, portable, and
MyCobot 280 M5Stack 6 DOF Collaborative Robot (Dual Screen Version) is a lightweight, portable, and versatile robotic arm that is ideal for education, research, and light industrial applications. It has a payload of 250 grams and a working range of 280 millimeters. It is equipped with six servo motors that provide precise and fluid movements.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.
Keeping this cookie enabled helps us to improve our website.
Please enable Strictly Necessary Cookies first so that we can save your preferences!
More information about our Cookie Policy