Next-Generation, Low-Cost, Automotive-Grade LiDAR InnovizTwo is Innoviz’s new high-performance, automotive-grade LiDAR sensor which offers a fully featured solution for all levels of autonomous driving at dramatically lower cost.

InnovizOne is a solid-state LiDAR sensor specifically designed for automakers and robotaxi, shuttle and delivery companies requiring an automotive-grade, mass-producible solution to achieve autonomy. The automotive-grade sensor is purpose-built to be rugged, affordable, reliable, low-power consuming, lightweight, high-performing and seamlessly integrable into Level 3-5 autonomous vehicles to ensure the safety of passengers and pedestrians alike.

The Ouster OS1-64 Rev7 is a high-resolution, digital lidar sensor designed for precision 3D mapping, autonomous vehicles, robotics, and industrial automation. As part of Ouster's OS1 series, this 64-channel lidar delivers superior performance with enhanced range, accuracy, and reliability in a compact, ruggedized form factor.

Mainboard: ELF mini V3.0 Operating Voltage: 6-12V (18650 Lithium battery pack included) On-board Sensor: Light Sensor, Sound Sensor, IR, LED, Buzzer External Sensor: Temperature and humidity sensor; PIR sensor; OLED display; 5V130 motor module (fan); MP3 module; Slide potentiometer; RJ11 adapter; 1 to 4 RJ11 Module; 9g servo motor. Communication: Bluetooth, IR, 2.4G(optional) Program Software: WeeeCode (Scratch 3.0), Arduino IDE.

Mainboard: ELF Operating Voltage:6-12V Motor: Encoder DC Motor*2, N30 motor*1, DC Motor*1 Electronics: Gyroscope sensor, Limit switch, RGB Ultrasonic Sensor,Line Following sensor, sound sensor, Infrared sensor, Onboard button, Buzzer,RGB LED Communication: Bluetooth, IR APP: WEEEMAKE (IOS & Android) Program Software: WeeeCode (Scratch 3.0), Arduino IDE. Power: 2x18650 Lithium battery (included)

Crank and Rocker Mechanism Double-rocker Mechanism Generator Meshing Belt Driving Mechanism Music Robot Oscillating and Reciprocating Mechanism Slider-crank Mechanism Ultrasonic Guitar Ultrasonic Radar

Mainboard: ELF Operating Voltage:6-12V/TT Motor*2/RGB Ultrasonic Sensor,Line Following sensor, sound sensor, Infrared sensor, Onboard button, Buzzer,RGB LED/Scartch3.0-&Arduino/Packing box Communication: Bluetooth, IR APP: WEEEMAKE (IOS & Android) Program Software: WeeeCode (Scratch 2.0 &3.0), Arduino IDE. Power: 2x18650 Lithium battery (included)

Mainboard: ELF Operating Voltage:6-12V/TT Motor*2/RGB Ultrasonic Sensor,Line Following sensor, LED matrix panel - 7*21, Light sensor,Infrared sensor,sound sensor,Onboard button,Buzzer,RGB LED/Scartch3.0-&Arduino/Packing box Communication: Bluetooth, IR APP: WEEEMAKE (IOS & Android) Program Software: WeeeCode (Scratch 2.0 &3.0), Arduino IDE. Power: 2x18650 Lithium battery (included)

Mainboard: ELF Operating Voltage:6-12V/TT Motor*2/RGB Ultrasonic Sensor,Line Following sensor,Light sensor、Infrared sensor,sound sensor,Onboard button,Buzzer,RGB LED/Scartch3.0-&Arduino/Packing box Communication: Bluetooth, IR APP: WEEEMAKE (IOS & Android) Program Software: WeeeCode (Scratch 2.0 &3.0), Arduino IDE. Power: 2x18650 Lithium battery (included)

An add-on set for Home Inventor Kit, offering 16 lessons with 8 new forms. Double-way Line-following sensor; Water Atomizer; PIR (motion) Sensor Flame Sensor Gas Sensor Water (raindrop) Sensor MP3 module Moisture Sensor Gesture Sensor 4 LED Button Water pump TT motors, etc

Mainboad: ELF mini V2.1 Operating Voltage: 3-6V (3.7V Li-po battery included) Input Module: Light Sensor, Sound Sensor, IR remote, Touch Sensor; RGB LED Ultrasonic Sensor; Temperature and Humidity Sensor Output Module: Buzzer; LED Module - Red; 5V130 Fan Module: 9g Servo; Segment display module; RGB LED Ultrasonic Sensor Switch: 1 xTouch switch (turn on/off robot when toggle switch is off) 1 x Toggle switch (keep robot turned on when toggle switch is on) Program Software: WeeeCode (Scratch 2.0 &3.0), Arduino IDE.

Mainboard: ELF mini V2.1 Operating Voltage: 3-6V (3.7V Lithium battery included, 4 blue LED power indicator) On-board Sensor: Light Sensor, Sound Sensor, IR, RGB LED, Buzzer. External Sensor: RGB Ultrasonic Sensor, Double-way Line-following Sensor, 5*14 LED Matrix Panel Communication: Bluetooth, IR Switch: 1 xTouch switch (turn on/off robot when toggle switch is off) 1 xToggle switch (keep robot turned on when toggle switch is on) APP: WEEEMAKE (IOS & Android) Program Software: WeeeCode (Scratch 2.0 &3.0), Arduino IDE.