The Unitree Z1 Gripper is a robotic gripper designed by Unitree Robotics. It features a compact and lightweight design, making it suitable for various robotic applications. The gripper is equipped with multiple degrees of freedom, allowing for precise and versatile grasping capabilities. It's commonly used in robotics research, industrial automation, and other fields requiring manipulation tasks. Compatible with Aliengo and B1

Unitree Z1 Manipulator - version PRO / Only compatible with Robot dog AlienGo and B1  DOF 6 Weight: 4,1 - 4,3 Kg Payload: Z1 PRO - 3-5kg | Z1 AIR - 2kg Reach: 700 mm Compatible with Aliengo and B1

NVIDIA Jetson NX For Go1 Edu basic version, it will be equipped with 3 Nano, but 1 Nano can be changed into 1 Jeston Xavier NX. After the installation of NX, it will support vslam, gesture recognition, machine learning, etc.

Unitree Go1 Battery This is a replacement battery for the Go 1 Quadruped Robot can be easily installed on the side of the platform. It has 4 green status LEDs to indicate its charge level. Once drained, simply replace it and plug it into the charger.

The Unitree B1 Motor is a high-performance brushless DC motor designed for use in quadruped robots. It features a maximum instantaneous torque of 140 N.m, a maximum joint rotate speed of 30 rad/s, and a weight of 1740g. The B1 Motor is also highly efficient, with a peak efficiency of 90%.

The Aliengo robot dog battery provides up to 4.5 hours of autonomy for all the routine operations carried out by your four-legged mobile platform.

The Unitree A1 Motor is a high-performance motor designed for use in quadruped robots. It features a maximum instantaneous torque of 0.9287 N.m, a maximum joint rotate speed of 21 rad/s, and a weight of 605g. The A1 Motor is also highly efficient, with a peak efficiency of 90%.

The Unitree 4D LiDAR L1 is a powerful and versatile 4D LiDAR sensor that is ideal for a wide range of mobile robotics applications. It features a 360° x 90° field of view, a maximum scanning distance of 30 meters, and a measurement accuracy of ±2.0 cm. The L1 is also highly resistant to environmental interference, making it ideal for use in outdoor environments.

Go2 Remote Control 100 Meters Ultra-long Control Distance，Reliable and Durable. 1.Charging voltage: 5V 2.Charging current: 2A 3.Frequency: 2.4GHz 4.Communication mode: digital transmission module, Bluetooth 5.Running time: 4.5h 6.Remote control distance: more than 100m

1. Degree of freedom: 6 2. Load: 500g (ideal weight) 3. Maximum arm span 600mm (excluding the length of the clamping jaws, subject to minor variations for subsequent structural changes); 715mm (including the length of the jaws, subsequent structural changes may have a small change)" 4. Power Requirement: 24V 2.5A (MAX 5A) Interface: DC5.5-2.1 Power: 60W 5. Control interface: control communication interface RJ45 (ETH)

1.Charging voltage: 33.6V 2.Charging current: 9A 3.Working environment temperature: 5℃-40℃ 4.Storage Temperature: 22℃-28℃. 5.Relative humidity: ≤95%. 6. Must use together with Go2 EDU Plus (Mid-360 LiDAR) or Go2 EDU Plus (XT16 LiDAR)

The GO-M8010-6 permanent magnet synchronous motor is designed for high-performance robots and provides a strong driving force with a high level of integration.